Gateway 980 - Manual (Page 73)

68
Chapter 4: Installing Components
www.gateway.com
12
Lift the tray away from the case.
13
Insert the new system board tray into the case, then slide the tray toward
the back of the case.
14
Tighten the system board tray thumbscrew on the back of the case.
15
Reinstall the memory, processors, voltage regulators, and fans.
16
Connect the power and data cables.
17
Reinstall the expansion cards. For more information, see “Installing PCI
expansion cards” on page 47 .
18
Follow the instructions in “Closing the server case” on page 32 .
19
Turn on your server.
20
Press F2 when the Gateway logo screen appears during startup. The BIOS
Setup utility opens.
21
Check BIOS settings to make sure that they detect the server’s new
hardware, then save your changes (if any) and close the BIOS Setup utility.