GE F-801 - Manual (Page 18)

F-801 Internal RO System by GE Osmonics
12552e – 27 Feb 04 1 - 12 General Information
1.10 Specifications:
1.10.1 Input Water Requirements
Minimum Maximum
Input flow Rate 2.0 GPM N/A
Temperature (water) 10°C (50°F) 32°C (90°F)
NOTE:
Operating at lower temperatures may make it impossible for the F-801 RO to
produce adequate permeate for the dialysis machine.
pH (operating) 5.5 10.5
TF Membranes
pH w/chloramines present (operating) 5.5 8.5
TF Membranes
pH (cleaning) 2.0 11.0
TF Membranes
Pressure, dynamic 30 PSI 100 PSI
1.10.2 Flow Rates
Product Flow based on the following conditions:
New
Membranes
Operating Pressure: 150 PSI
Product Pressure: 1 PSI
Feed Water Temperature: 77 ° F (25 ° C)
GPM LPM GPD LPD
.41 1.55 588 2225.8
Membrane flux may vary ±15%
Waste Flow: 2000ml/min (
± 10%)
1.10.3 Electrical
Requirements
Motor 1/3 HP
Voltage 115 V~
Hertz 60
Amps 10
Phase single
Power Cord (length) 8 ft (2.4 m)