Grizzly G0624 - Manual (Page 12)

-10-
G0624 10" Benchtop Lathe
Wear safety glasses dur-
ing the entire set up pro-
cess!
This machine presents
serious injury hazards
to untrained users. Read
through this entire manu-
al to become familiar with
the controls and opera-
tions before starting the
machine!
Set Up Safety
SECTION 3: SET UP
The Model G0624 is a
heavy machine. DO NOT
over-exert yourself while
unpacking or moving
your machine—get assis-
tance.
The following items are needed to complete the
setup process, but are not included with your
machine:
Description Qty
• Cleaning Solvent (as needed) .................... 1
Items Needed for
Setup
The Model G0624 was carefully packed when it
left our warehouse. If you discover the machine
is damaged after you have signed for delivery,
please immediately call Customer Service at
(570) 546-9663 for advice.
Save the containers and all packing materials for
possible inspection by the carrier or its agent.
Otherwise, filing a freight claim can be difficult.
When you are completely satisfied with the condi-
tion of your shipment, inventory the contents.
Unpacking
Inventory
After all the parts have been removed from the
box, you should have the following items:
Box Contents: (Figure 3) Qty
A. 10" Benchtop Lathe (Not Shown) ............... 1
B. Safety Glasses ........................................... 1
C. Live Center ................................................. 1
D. Spur Center ................................................ 1
E. 3" Faceplate ............................................... 1
F. Tool Rest .................................................... 1
G. Knock Out Bar ............................................ 1
H. Tool Rest Lock Handles ............................. 2
If any nonproprietary parts are missing (e.g. a
nut or a washer), we will gladly replace them, or
for the sake of expediency, replacements can be
obtained at your local hardware store.
Figure 3. Additional box items.
B
C
D
E
F
G
H