Graco Forward Facing Child Restraint - Manual (Page 29)

29
6. All LATCH seating
positions have tether
anchors. Secure the
top of the seat using the
tether strap. See Section
7.4 Using the Tether,
page 30.
If you choose not to use
the tether, hook it on the
tether storage bar on
the back of the seat. See
Section 8.1, Storing
LATCH and Tether,
page 32.
7. Safety Check for
Secure Installation
Perform this test every
time you drive with your
child.
Holding the child restraint
near the vehicle belt path,
TWIST AND PULL the child
restraint forward and to both
sides to make sure the
LATCH belt does not
lengthen or loosen and the
child restraint does not
easily move
➎
. The child
restraint should not move
side to side or forward more
than 1 inch (2.5 cm).
If child restraint is loose
or not secure, repeat
procedure OR find another
location for the seat, see
Section 6.0 Child Restraint
Location, pp. 17-21.
gra co ba by. com
➎