Graco Forward Facing Child Restraint - Manual (Page 25)

25
4. Tighten vehicle seat belt
Push down with your free
hand or knee in the middle
of the child restraint
➋
.
Then pull and tighten the
shoulder portion of the
lap/shoulder belt.
For more information on
how to tighten the belt
for your seat belt
system, see Section
6.2 Vehicle Seat Belt
Requirements, pp. 18-21,
or your vehicle owner’s
manual.
5. While pulling the shoulder
portion of the lap/shoulder
belt, lay the shoulder belt
inside the opened lock-off
➋
and snap the lock-off
over the shoulder belt
➌
.
Two lock-offs are provided
to allow for the seat to be
installed on the right or left
side of the vehicle seat.
Only use one lock-off at
a time. NEVER try to use
both lock-offs when
installing the child
restraint.
DO NOT try to close the
lock-off over anything but
the shoulder portion of the
vehicle lap/shoulder belt. If
any other part of the belt is
in the way then try another
seat location.
➌
➋