Epson ARTISAN 835 User Manual
Start here, Artisan, 835 series
Start Here
2
Squeeze the edge guides and slide them out. Then
insert paper with the glossy or printable side face-down.
3
Slide the edge guides against the paper.
4
Lower the photo tray.
5
Squeeze the edge guides and slide them out. Then
insert 4 6-inch or 5 7-inch photo paper with the
glossy or printable side face-down.
Note:
Make sure the paper fits under the edge guides.
6
Slide the edge guides against the paper.
7
Keep the cassette flat as you insert it.
8
Extend the output tray and flip up the stopper.
Read these instructions before using your product.
1
Unpack
French control panel
stickers (Included for
Canada only)
Phone cord
Power cord
Caution:
Do not open ink cartridge packages until you are ready to
install the ink. Cartridges are vacuum packed to maintain reliability.
Remove all protective materials from the printer, including
from inside the paper cassette.
1
Raise the scanner and remove the transportation lock.
2
Store the transportation lock as shown.
3
Lower the scanner.
2
Turn on and adjust
1
Connect the power cable.
Caution:
Do not connect to your computer yet.
2
Press the
On button, then
raise the control panel.
To lower the control panel,
press the
Unlock button.
Caution:
To avoid damaging your
printer, always press and hold the
Unlock button to lower the control panel.
3
Select settings
1
Select your language and country.
Touch the screen to select the desired option. Press
or
to see more countries.
2
Select the current
Daylight Saving Time setting (Winter
or
Summer) and press OK.
3
Select the date format.
4
Use the numeric keypad to set the date, then press
OK.
5
Select the time format (
12h or 24h).
6
Use the numeric keypad to set the time.
7
Press
OK when done.
Note:
You can change the date and time settings by pressing the
Home button, selecting Setup, selecting Printer Setup, then Date/
Time. For more information on using and adjusting the control panel,
see your Quick Guide.
4
Install ink cartridges
Note:
Do not load paper yet.
1
Lift up the scanner.
2
Unpack the ink cartridges.
3
Remove only the yellow tape from each cartridge.
Caution:
Don’t remove any other seals or the cartridges may
leak.
4
Insert the cartridges in the holder for each color. Press
each cartridge down until it clicks.
5
Lower the scanner.
6
Wait while the printer is priming, which takes about 5
minutes.
Note:
Your printer ships with full cartridges and part of the
ink from the first cartridges is used for priming the printer.
Replacement cartridges will print more pages.
Caution:
Don’t turn off the printer while it is priming or you’ll
waste ink.
5
Load paper
The paper cassette has 2 trays. The main tray is for A4,
letter-size, legal-size, or 8 10-inch paper. The photo tray
is for 4 6- or 5 7-inch photo paper. For instructions on
loading legal-size paper, see the online User’s Guide.
1
Pull out the paper cassette. Then slide back the photo
tray and lift it up.
*411893400*
*411893400*
Artisan
®
835 Series