Grizzly H8225 - Manual (Page 6)

Model H8225 2 1 ⁄
2
Gallon Paint Tank with Gun -4 -
INTRODUCTION
Specifications Foreword
The specifications, details, and
photographs in this manual represent
the Model H8225 as supplied when the
manual was prepared. However, owing to
Grizzly’s policy of continuous improvement,
changes may be made at any time with no
obligation on the part of Grizzly.
If you have any comments regarding this
manual, please write to us at the following
address:
Grizzly Industrial, Inc.
C/O Technical Documentation
P.O. Box 2069
Bellingham, WA 98227-2069
E-Mail: [email protected]
Most importantly, we stand behind our
tools. If you have any service questions or
parts requests, please call or write us at
the location listed below.
Grizzly Industrial, Inc.
1203 Lycoming Mall Circle
Muncy, PA 17756
Phone: (570) 546-9663
Fax: (800) 438-5901
E-Mail: [email protected]
Web Site: http://www.grizzly.com
Paint Tank
Material Capacity ...........2 1 /
2
Gallons (10 L)
Operating Pressure ...................25–30 PSI
Maximum Operating Pressure ......... 50 PSI
Tank Construction ........... Galvanized Steel
High Pressure Spray Gun
Type of Feed...................................Suction
Air Inlet....................................................
1 /
4
"
Operating Pressure....................45–60 PSI
Maximum Operating Pressure.......120 PSI
Standard Dia of Nozzle...................2.0 mm