Grizzly H8225 - Manual (Page 13)

-11 - Model H8225 2 1 ⁄
2
Gallon Paint Tank with Gun
12. Overlap each stroke by 50%. This will
ensure even coverage as shown in
Figure 6. Overlapping less than 50%,
as shown in the figure to the right,
may lead to missed spots or streaky
results.
13. The spray stroke should have even con-
sistency and parallel edges. If it doesn't,
please refer to
Troubleshooting on
Page 15.
CONTAMINATION HAZARD! Dispose
of paint waste in a responsible man-
ner! Follow manufacturer's recom-
mendations and local laws regarding
disposal.
��
���
Figure 6. Overlap technique.
No Yes
The atomizing cap needs to be adjusted
for horizontal or vertical spraying patterns,
as shown in
Figures 7 and 8 Spraying in
the wrong direction may lead to material
build up on the atomizing cap horn. Many
performance problems are caused by
clogged atomizing holes on the atomizing
cap horns (see
Cleaning on Page 13).
Atomizing Cap and
Fan Adjustments
Stroke
Holes
Figure 7. Set up for horizontal stroke
direction with vertical fan pattern.
Figure 8. Set up for vertical spray stroke
with horizontal fan pattern.
Stroke
Holes
Figure 9. Fan adjustment.
Rotating the pattern adjustment control will
give you a range between the two patterns
in
Figure 9.
Holes