Grizzly Disc G0724 - Manual (Page 23)

Model g0724 (Mfg. since 09/11)
-21-
SECtION 6: MAINtENANCE
Always disconnect power
to the machine before
performing maintenance.
failure to do this may
result in serious person-
al injury.
For optimum performance from your machine,
follow this maintenance schedule and the instruc-
tions given in this section.
Daily Check and Maintenance:
•
loose mounting bolts.
• Worn loose, or damaged sanding disc.
• Worn or damaged power cord.
• any other condition that could hamper the
safe operation of this machine.
• Wipe off the sawdust build-up from the table
surface.
Weekly Maintenance:
•
Vacuum out dust from the motor fan area and
from around the base of the machine.
• Keep unpainted surfaces rust free with prod-
ucts such as Boeshield® t-9.
Schedule
Cleaning the Model g0724 is easy. Vacuum
excess wood chips and sawdust from motor fan
area, and wipe off the remaining dust with a dry
cloth. if any resin has built up, use a resin dissolv-
ing cleaner to remove it. treat all unpainted cast
iron and steel with a non-staining lubricant after
cleaning.
Cleaning
unpainted Cast Iron
this machine uses permanently lubricated ball
bearings. no bearing maintenance is required.
Lubrication
protect the cast iron table from rust by wiping
it clean after every use—this ensures moisture
from wood dust does not remain on bare metal
surfaces.
Keep tables rust-free with regular applications of
products like g96
® gun treatment, slipit ® , or
Boeshield ® t-9 ( figure 25).
figure 25. recommended products for protect-
ing unpainted cast iron/steel part on machinery.
G5562—SLIpIt ® 1 Qt. Gel
G5563—SLIpIt ® 12 oz Spray
G2871—boeshield ® t-9 12 oz Spray
G2870—boeshield ® t-9 4 oz Spray
h3788—G96 ® Gun treatment 12 oz Spray
h3789—G96 ® Gun treatment 4.5 oz Spray