GE Monogram ZBD3000 - Manual (Page 20)

HOW TO CHANGE COLOR PANELS
If you are redecorating, you can change your The panels are held in place by the door trim and the
dishwasher’s front panels to match or blend with your trim on the panel below the door. Each side of each
new colors. panel is a different color. Or you can paint a panel with
the color of your own choice.
How to Change Door Panel Insert
1. Take out trim screws on either side
of the dishwasher door. Remove the side trim.
2. Slide out the insert panel.
3. Put the color you want in front.
(Careful—edges may be sharp).
4. Replace the insert panel, side trim and screws.
NOTE: Do not operate
dishwasher while changing
panels or when lower
access panel is removed.
How to Change Lower Panel Insert:
-c
Top
Trim .
\
“ L -
Attachment Screws
1. Remove the access assembly by taking out
the attachment screws and then lifting it up and
clear of the retaining tabs.
2. Take out the top trim screws and remove the
top trim.
3. Slide the color panel (s) up and out and put the
color you want in front.
4. Replace the top trim and screws.
5. Replace the entire access assembly by hanging
it back on the retaining tabs and replacing the
attachment screws.
Match Your Kitchen
Color insert panels for both the door and the lower
panel can be replaced by 1/4” thick wood inserts to
match your kitchen cabinets. Get them from your
nearest cabinet or lumber dealer.
Dimensions for 1/4” wood inserts:
Door Panel: H X W.
Lower Panel: H X W.
20