GE Monogram ZBD3000 - Manual (Page 15)

HOW TO LOAD YOUR DISHWASHER
This is random mixed load, the most common type
you will have.
Make sure dishes are properly loaded to insure that
water can reach the soiled surfaces. The wash arm in
the bottom sprays water up. The tower that rises in
the center sends water out over the dishes to wash the
items in the upper rack. A spray arm in the top washes
down also. Make sure to place tall items to the outside
so the upper wash arm is not blocked.
WATCH OUT FOR THIS.
The washer tower rises through the center of the
bottom rack during the wash and rinse portions of
the cycle. Don’t block it or load tall things next to it.
Also, be careful not to let a portion of an item such
as a pot or dish handle extend through the bottom
rack. This could block the wash arm and cause poor
washing results.
HOW TO LOAD THE TOP
The top rack is best for glasses, cups and saucers.
Cups and glasses fit best along the sides. This is the
place for dishwasher-safe plastics, too. Make sure
small plastic items are lodged in tightly so they can’t
fall onto the
element. Arrange
stemware so that it cannot move easily. Don’t let
the glasses touch each other.
Sauce pans, mixing bowls and other small items may
be placed—face down—in the top rack. The top rack
is handy for
kinds of odd shapes.
15