Grizzly G0548Z - Manual (Page 35)

g0548zp, g1028z2, g1029z2-z2p (mfg. 12/12+)
-33-
section 5: operations
general
operating a dust collector is simple and straight-
forward. turn the dust collector
ON, then turn
the dust producing machine ON. When you are
finished with the machine operation, turn the
machine
OFF, then turn the dust collector OFF.
Blast gates can be used at the start of each branch
line to control the air flow from the woodworking
machine to the dust collector. if a machine is not
being used, keep the blast gate closed to maintain
higher levels of efficiency throughout the system.
When the dust collector is not in use, unplug the
power cord from the power source. place the
cord away from potential damage sources, such
as high traffic areas, sharp objects, heat sources,
harsh chemicals, water, damp areas, etc.
machine storage
damage to your eyes and lungs could result
from using this machine without proper pro-
tective gear. always wear safety glasses and
a respirator when operating this machine.
to reduce the risk of
serious injury when using
this machine, read and
understand this entire
manual before beginning
any operations.
NOTICE
if you have never used this type of machine
or equipment before, We strongly rec-
ommend that you read books, trade maga-
zines, or get formal training before begin-
ning any projects. regardless of the con-
tent in this section, grizzly industrial will
not be held liable for accidents caused by
lack of training.
do not put hands or
small objects near inlet
openings during opera-
tion. objects sucked
into the inlet will meet
with the impeller blade.
failure to heed this
warning could result in
property damage or per-
sonal injury.