Table tilt, Table height – Grizzly G0574 User Manual
Page 20
-16-
G1140 Edge Sander
Table Tilt
Figure 21.
Table tilt adjustment.
1.
Loosen the lock handles, tilt the working
table to the desired angle and retighten the
lock handles.
See Figure 21.
2.
It may be necessary to re-adjust the working
table closer to the platen. Not more than a
1
⁄
4
'' gap should exist between the platen and
the working table.
Table Height
Figure 22.
Table height adjustment.
1.
Loosen lead screw lock handle and stabiliz-
ing shaft lock bolt.
See Figure 22.
2.
Turn hand wheel and position working table
to desired height.
3.
Retighten lock handle and lock bolt.
See also other documents in the category Grizzly Grinding machines:
- H7760 (32 pages)
- H2881 (1 page)
- 9962ZX (80 pages)
- G0565 (32 pages)
- G0473 (24 pages)
- 6" random orbital sander H8120 (4 pages)
- G1276 (34 pages)
- G1071 (40 pages)
- Pneumatic Sanding Drum G1970 (1 page)
- G9983 (60 pages)
- Air Belt H0596 (4 pages)
- G1079 (54 pages)
- G1066 (54 pages)
- G9907 (10 pages)
- G0512 (44 pages)
- G1014Z (27 pages)
- G1600 (1 page)
- H7672 (20 pages)
- 7" Angle Sander H0592 (2 pages)
- G0547 (35 pages)
- G0489 (28 pages)
- G0459P (56 pages)
- G0563 (52 pages)
- 12" Drum Sander G0459 (56 pages)
- G1971 (1 page)
- G0486/G0487 (76 pages)
- Drum H2882 (1 page)
- 7" Angle Polisher H0593 (2 pages)
- G0679 (11 pages)
- H8192 (36 pages)
- H3140 (32 pages)
- G3105 (26 pages)
- G0458 (48 pages)
- H8215 (8 pages)
- G9984 (44 pages)
- G0445 (80 pages)
- G1066Z (54 pages)
- G5049Z (26 pages)
- G9910 (10 pages)
- G8749 (24 pages)
- G1870 (2 pages)
- G0571 (3 pages)
- G0475 (20 pages)
- Oscilatign Spindle GO739 (32 pages)