GE 27907 Series - Manual (Page 59)

59
7. Use the touch-tone pad to enter the telephone number
(up to 0 digits, including pauses (press #pause/ringer
button), and press the memory button again to save the
record. The unit beeps to confirm.
NOTE: The system treats PAUSES as delays or
spaces in the dialing sequence.
8. To enter another name and number in a different memory
location, return to step and repeat the process.
Storing the Last Number Dialed
You may transfer all three redial numbers into internal user
memory.
1. Make sure the phone in
OFF (not in TALK mode).
. Press redial button to display the most recent redial
number.
. Use the caller ID-volume ( 6 or 5) button to scroll to
desired redial number.
. Press memory button to display SELECT MEMORY 01 - 50.
5. Use touch-tone pad to enter two digit desired memory
location (01 through 50). Display will show ENTER NAME.
6. Follow step 5 in the “Storing a Name and Number in
Memory” section to enter name.
NOTE: If the memory location is occupied,
REPLACE MEMO? is displayed, and you must
confirm replacement by pressing the memory
button.