GE 27907 Series - Manual (Page 35)

5
Tone/Pulse
From the Handset Setup Menu:
1. Press the caller ID-volume ( 5 or 6) button to scroll to the
TONE PULSE sub-menu.
. Press mute/program button to enter the menu. TONE/
PULSE 41TONE 2PULSE shows in the display. The default
setting is “1 TONE”.
. Use the touch-tone pad or caller ID-volume ( 5 or 6) to
enter 1 TONE or 2 PULSE.
. Press the mute/program button to confirm. You will hear a
confirmation tone and your selection shows in the display.
Registration
Your packaged handset(s) are pre-registered and ready to
use. It is not recommended that a handset be registered
again unless absolutely necessary.
From the Handset Setup Menu:
1. Press the caller ID-volume ( 6 or 5) button to scroll to the
REGISTRATION sub-menu.
. Press the mute/program button to enter the menu.
REGISTRATION 1YES42NO - - - shows in the display The
default setting is 2NO.
. Use the touch-tone pad to select 1 for YES or for NO. Or
use the caller ID-volume ( 6 or 5) button to scroll to 1YES
or 2NO.