GE 27907 Series - Manual (Page 39)

9
From the Handset Setup Menu:
1. Press the caller ID-volume ( 6 or 5) button to scroll to the
DEFAULT SETTING sub-menu.
. Press the mute/program button to enter the menu.
DEFAULT SETTING 1YES 2NO shows in the display. The
default setting is 2NO.
. Use the touch-tone pad to select 1YES or 2NO, or use the
caller ID-volume ( 6 or 5) button to move the cursor to
1YES or 2NO.
NOTE: If you choose YES all the settings in the
programmable menu are returned to factory
default setting.
. Press the mute/program button to save your selection.
You will hear a confirmation tone.
Telephone Operation
Visual Indicators
Base
The indicator on the base will flash to alert you to an
incoming call, during paging, or if you have a message
waiting from your service provider. The indicator will remain
lit when a handset is in the base charging or when the line is
in use.