Grizzly H3140 - Manual (Page 16)

-14-
Model h3140 (Mfg. after 6/02)
SEcTiON 4: OpERATiONS
Damage to your eyes and lungs could result
from using this machine without proper pro-
tective gear. Always wear safety glasses and
a respirator when operating this machine.
notice
if you have never used this type of machine
or equipment before, WE STRONgLy REc-
OMMEND that you read books, review
industry trade magazines, or get formal
training before beginning any projects.
Regardless of the content in this section,
grizzly industrial will not be held liable for
accidents caused by lack of training.
Loose hair, clothing, or
jewelry could get caught
in machinery and cause
serious personal injury.
Keep these items away
from moving parts at all
times to reduce this risk.
To reduce the risk of
serious injury when using
this machine, read and
understand this entire
manual before beginning
any operations.
Basic controls
use figure 7 and the descriptions below to
become familiar with the basic controls of your
machine.
Sanding Belt Tracking/Tension Release Knob:
turning the knob adjusts the belt tracking left and
right. pushing the knob inward releases tension
from the sanding belt for easier belt removal.
ON/Off Switch: supplies power to the motor,
moving the sanding belt.
Table Lock Lever: tightens to secure the table
and loosens to allow for repositioning of the table
for angle sanding.
figure 7. basic controls.
on/oFF switch
sanding belt
tracking/
tension
release Knob
table tilt lock lever