Grandstream Networks HT-496 User Manual
Page 19
Grandstream Networks, Inc.
HT–496 User Manual
Page 19 of 33
Firmware 1.0.3.64
Last Updated: 1/2007
Cloned WAN MAC
Address:
Set a specific MAC address. Set in Hex format.
LAN Subnet Mask
Sets the LAN subnet mask. Default value is 255.255.255.0.
LAN DHCP Base IP:
Base IP for the LAN port that functions as a gateway for the subnet. Default
value is 192.168.2.1.
DHCP IP Lease
Time:
Value is set in number of hours. Default value is 120hr (5 Days.) The amount
of time IP address are assigned to LAN clients.
DMZ IP:
Forward all WAN IP traffic to a specific IP address if no matching port is used
by HT–496or defined in port forwarding.
Port Forwarding:
Forwards a matching (TCP/UDP) port to a specific LAN IP address with a
specific (TCP/UDP) port.
In addition to the Basic Settings configuration page, end users also have access to the Device Status
page.
T
ABLE
8: HT–496 Device Status Page Definitions
MAC Address
The device ID in HEX format. This is needed for ISP troubleshooting.
WAN IP Address
Shows WAN IP address of HT–496.
Product Model
Contains the product model info.
Software Version
Program: This is the main software release. Boot and Loader are seldom
changed.
System Up Time
Shows system up time since the last reboot.
Registered
Indicates whether the HT–496 is registered to the service provider’s
server.
PPPoE Link Up
Indicates whether the PPPoE connection is up if the HT–496is connected
to DSL modem.
NAT
Indicates the type of NAT the HT–496 is connected to via its WAN port.
Based on STUN protocol.
VoIPon www.voipon.co.uk [email protected] Tel: +44 (0)1245 808195 Fax: +44 (0)1245 600030