GE Monogram JET343G - Manual (Page 33)

QUESTIONS?
USE THIS PROBLEM SOLVER
PROBLEM
OVEN WILL NUT
COME ON
CONTROL PANEL
LIGHTED, YET
WILL NOT START
FOODS ARE EITHER
OVERCOOKED OR
UNDERCOOKED
APPEARS
ON DISPLAY
APPEARS
ON DISPLAY
“PROB” APPEARS
ON DISPLAY
POSSIBLE CAUSE
●
A fuse in your home may be blown or the circuit breaker tripped. Replace fuse or
reset circuit breaker.
Unplug your microwave/convection oven, then plug it back in.
●
Make sure 3-prong plug on oven is fully inserted into receptacle.
●
Door not securely closed.
●
START pad must be touched after entering cooking selection.
●
Another selection entered already in oven and pad not touched
to cancel it.
Make sure have entered cooking time or temperature after touching
COOK pads.
pad was touched accidentally. Reset cooking program touch
START pad.
●
Temperature not inserted properly during Temperature function or not being
used during Roast.
●
Make sure you have entered a desired finished temperature after setting Temperature
ROAST or-AUTO DEFROST pads.
●
Make sure you have entered a code number after touching Combination COOK pad
for Combination Time Cooking or Combination Temperature Cooking,
●
Not enough time set Time function because starting food
temperatures vary.
●
The density and amount of foods will vary thus may need more time for
completion.
Dish in Cook not covered as directed.
●
Check Cookbook and Microwave Temperature Cooking section specific
probe placement.
Incorrect code numbers entered after touching AUTO COOK or
AUTO ROAST pads.
●
Incorrect power level entered.
●
Dish not rotated, turned stirred if these instructions were in the recipe.
●
Too many dishes in at same time,
●
Check Cookbook for correct accessories such as shelves and food placement
them.
. Incorrect finished temperature entered with temperature-controlled functions.
●
air blocked with convection or combination functions.
●
Indicates open or short circuit in any one of a number of components. Power is
shut off automatically. Request service.
Impossible time of day such as has been entered for clock.
●
Temperature not plugged in securely when using Temperature
Auto Roast.
If you need more toll free:
GE Answer Center”
800.626.2000
consumer information service
33