Gefen GTB-HD-SIGGEN - Manual (Page 85)

79
RS-232 COMMANDS
Commands
Command Description
ASC001
Audio source is from external L/R
ASC002
Audio source is from external OPTICAL
ASC003
Audio source is from internal Sinewave
ASC999
Query audio source status
ATO000
Set Autorun Off
ATO001
Set Autorun On
ATO999
Query Autorun Action status
ATNnnn
Autorun Number, nnn = 001 ~ 032 (see note 2 on page 81)
ATTnnn
Autorun Timing, nnn = 001 ~ 039
ATPnnn
Autorun Pattern, nnn = 001 ~ 050
ATInnn
Autorun time Interval, nnn = 005 ~ 600 (seconds)
ATS999
Query Autorun Confi guration status
CRRnnn
Set the Red (Cr) ColorSetting value, nnn = 000 ~ 255
CRGnnn
Set the Green (Y) ColorSetting value, nnn = 000 ~ 255
CRBnnn
Set the Blue (Cb) ColorSetting value, nnn = 000 ~ 255
CRYnnn
Set the Gray ColorSetting value, nnn = 000 ~ 255
CRR999
Query Red (Cr) ColorSetting status (see note 3 on page 81)
CRG999
Query Green (Y) ColorSetting status
CRB999
Query Blue (Cb) ColorSetting status
CRY999
Query Gray ColorSetting status
CSC001
Set color space to RGB:444
CSC002
Set color space to YUV:444
CSC003
Set color space to YUV:422
CSC999
Query color space status
DEE001
Set deep color to 8-bit
DEE002
Set deep color to 10-bit
DEE003
Set deep color to 12-bit
DEE999
Query deep color status
ESC001
EDID source is from Tx (HDMI / DVI Out)
ESC002
EDID source is from Rx (built-in active EDID)
ESC003
EDID source is from Rx1 (built-in EDID1)
ESC004
EDID source is from Rx2 (built-in EDID2)