Hd pattern signal generator software – Gefen GTB-HD-SIGGEN User Manual
Page 53
47
HD PATTERN SIGNAL GENERATOR SOFTWARE
Selecting the Timing
1.
Use the Timing Select button to select the timing / resolution of the output
signal.
2. Press
the
SET button to set the timing.
Click the SET button
to enable the timing
Retrieves the current
settings
Select the timing
in the Timings window
NOTE:
After changing a timing, pattern, the output format, or
toggling HDCP, make sure to press the Refresh button on the left
side of the window. The HD-SIGGEN Status window is not
automatically updated, even if a change has been made through
the software or using the front panel. Clicking the Refresh button
will retrieve the current settings from the HD Pattern Signal
Generator. Otherwise HD-SIGGEN Status window will display
“Link Error”.