Presentation, 3 search method, Movement pattern – Gardena Robotic Lawnmower R40Li User Manual
Page 14
14 - English
2. PRESENTATION
The control panel on the top of the robotic
lawnmower is where you manage all the robotic
lawnmower settings. Open the control panel cover by
pressing down the
STOP
button.
When the main switch is set to position
1
for the first
time, a start-up sequence begins which includes
language selection, time format, date format and the
four-digit PIN code and setting the time and date. See
3.8 First start-up and calibration
on page 32.
Movement pattern
The robotic lawnmower’s movement pattern is
irregular and is determined by the robotic lawnmower
itself. A movement pattern is never repeated. With
the mowing system the lawn is mown equally without
any mowing lines from the robotic lawnmower.
2.3 Search method
The robotic lawnmower runs irregularly until it reaches
the guide wire. Then the robotic lawnmower follows the
guide wire to the charging station.
The guide wire is a wire that is laid from the charging
station towards, for instance, a remote part of the
working area or through a narrow passage to be then
connected with the boundary wire. For more
information, see
3.6 Installation of the guide wire
on page 32.
Start
1
1
2
3
4
5
4
7
8
0
9
5
6
2
3