12 service schedule – Guardian Technologies 005282 User Manual
Page 27

25
Section 4 — Maintenance
Air-cooled Generators
4.12 SERVICE SCHEDULE
ATTENTION: It is recommended that all service work
be performed by the nearest Authorized Dealer.
SYSTEM/COMPONENT PROCEDURE
FREQUENCY
X = Action
Inspect
Change
Clean
W = Weekly
R = Replace as Necessary
M = Monthly
* = Notify Dealer
Y = Yearly
if Repair is Needed.
FUEL
Fuel lines and connections*
X
M
LUBRICATION
Oil level
X
M
Oil
X
EVERY
100
HOURS**,
AND
Y
Oil filter
X
EVERY
100
HOURS**,
AND
Y
COOLING
Enclosure louvers
X
X W
BATTERY
Remove corrosion,
X
X M
ensure dryness
Clean and tighten
X X M
battery terminals
Check charge state
X
R
EVERY 6 M
Electrolyte level
X
R
EVERY 6 M
(unsealed batteries only)*
ENGINE AND MOUNTING
Air cleaner
X
R
Y
Spark plug(s)
X
R
Y
GENERAL CONDITION
Vibration, Noise, Leakage,
X
M
Temperature*
COMPLETE TUNE-UP*
TO BE COMPLETED BY AN
Y
AUTHORIZED
DEALER
* Contact the nearest Authorized Dealer for assistance if necessary.
** Change oil and fi lter after fi rst eight (8) hours of operation and then every 100 hours thereafter. Change sooner
when operating under a heavy load or in a dusty or dirty environment or in high ambient temperatures.