Grizzly G0695 User Manual
Page 7

model g0695 (mfg. since 9/10)
-5-
The information contained herein is deemed accurate as of 10/12/2010 and represents our most recent product specifications.
Due to our ongoing improvement efforts, this information may not accurately describe items previously purchased.
PAGE 2 OF 2
Model G0695
Table Info
Table Length.............................................................................................................................................. 30 in.
Table Width.................................................................................................................................................. 8 in.
Table Thickness........................................................................................................................................... 2 in.
No. Of T Slots....................................................................................................................................................3
T Slots Width............................................................................................................................................. 1/2 in.
T Slots Height............................................................................................................................................7/8 in.
T Slots Centers.................................................................................................................................... 2-3/16 in.
Stud Size...................................................................................................................................................3/8 in.
Spindle Info
Spindle Taper................................................................................................................................................ R-8
End Milling Cap............................................................................................................................................ 1 in.
Face Milling Cap...........................................................................................................................................3 in.
Draw Bar Diameter..................................................................................................................................7/16 in.
Draw Bar TPI............................................................................................................................................ 20 TPI
Draw Bar Length.................................................................................................................................. 12-3/8 in.
Spindle Bearings....................................................................................................................... Angular Contact
Construction
Table Const......................................................................................... Hardened & Precision-Ground Cast Iron
Head Const...........................................................................................................................................Cast Iron
Column Const.......................................................................................................................................Cast Iron
Base Const........................................................................................................................................... Cast Iron
Paint..................................................................................................................................................... Urethane
Other Specifications:
Country Of Origin ..............................................................................................................................................Taiwan
Warranty ............................................................................................................................................................ 1 Year
Serial Number Location ...................................................................................................... Machine ID Label on Side
Assembly Time ..................................................................................................................................................1 Hour
Features:
One-Shot Lubrication
High Precision Ball Bearings
Bronze Nut on Longitudinal and Cross Feed Leadscrews
Variable Frequency Drive Speed Controls
Hardened and Precision Ground Leadscrews
Runs on Single-Phase Power Using a 3-Phase Inverter