Grizzly G0703 11 - Manual (Page 25)

Model g0703 (Mfg. since 8/09)
-25-
SECTiON 6: aCCESSORiES
ACCESSoriES
P0703088—220v Mag Switch
installing this mag switch will allow you to run the
g0703 on 220V single-phase power. to convert
the dust collector to 220V, just remove the 110V
switch, install this one in its place, and rewire the
motor. it’s as simple as that!
figure 30. p0703088 220V Mag Switch.
G9956—Remote Controlled Double air filter
G0572—Hanging air filter with Remote
these hanging Air Filters have convenient remote
controls and feature a three speed motor, auto-
matic shutoff timer and hang easily from the work-
shop ceiling!
figure 31. g0572 dust Filter.
H8174—Cyclone bag Holder
H8469—Replacement bags (5 Pack)
the cyclone bag holder is a specially designed
metal piece that keeps an empty bag from being
pulled up into the cyclone. replacement bags are
a must to avoid creating clouds of fine dust that
occur if bags are dumped out. With these you can
simply tie the bag off and throw it away.
figure 32. Cyclone dust bag and holder.
figure 33. half-mask respirator with disposable
cartridge filters.
T20514—Small Half-Mask Respirator
T20515—Medium Half-Mask Respirator
T20516—Large Half-Mask Respirator
T20511—Pre-filter P100
T20539—Cartridge filter 2PK P100
T20541—Cartridge filter 2PK P100 & O vapor
Wood and other types of dust can cause severe
respiratory damage. if you work around dust every
day, a half-mask respirator can greatly reduce
your risk. Compatible with safety glasses!