Grizzly G0703 11 - Manual (Page 24)

-24-
Model g0703 (Mfg. since 8/09)
Remote Control
Operation
to prevent accidental startups by other common
rF items like garage door openers, the remote
control signal for the Model g0703 is ir (infrared)
rather than a rF (radio frequency) signal.
By pressing the on/oFF button, you can turn the
dust collector
ON and OFF.
By pressing the tiMEr button once or a series
of times, you can cycle the auto shut down time
from always on, to timed operation intervals of
2 hours, 4 hours, and 8 hours. When illuminated,
the red led lamp indicates which operation mode
the machine is in.
if you plan on placing your dust collector in a dif-
ferent room or outside of your shop, you must
mount the switch in the shop and wire it through
the wall to the dust collector to make use of the
remote control.
A remote control receiver and hand-held control-
ler (
figure 29) allows the dust collector to be
turned ON and OFF from across the room up to
75-feet away, providing that direct line-of-sight is
maintained.
the Model g0703 is equipped with an overload
indicator light. if the dust collector experiences
an overload this light comes on and the machine
shuts down.
to restart the machine, you must first fix the cause
of overload, then turn the rocker switch
OFF then
ON to reset the overload.
figure 29. remote control.