Turning the fishfinder 300c on, Using simulator mode – Garmin 190-00864-01 User Manual
Page 4
Fishfinder 300C Quick Start Manual
Turning the Fishfinder 300C
On
Press and hold the
POWER
key until the
Fishfinder 300C beeps and the Home screen
appears.
NOTE: When you turn on the Fishfinder
300C for the first time, you must select a
language, units of measure, and a color
scheme (
16
).
To adjust the backlight:
1. Press and release the
POWER
key.
2. Press left or right on the
ROCKER
>
SELECT
.
To adjust the day/night mode:
1. Press and release the
POWER
key.
2. Press down on the
ROCKER
to
highlight the day/night bar.
3. Press left or right on the
ROCKER
>
SELECT
.
Using Simulator Mode
If a transducer is not connected, no data is
shown. Use Simulator Mode to practice and
learn how to use your Fishfinder 300C.
CaUTiON: When in Simulator Mode, the
depth, temperature, and speed information
do not represent the actual depth, water
temperature, or vessel speed.
To turn on the Simulator Mode:
From the Home screen, select
Configure
>
System
>
Simulator
>
On
.