Garmin 190-00864-01 - Manual (Page 16)

Fishfinder 300C Quick Start Manual
Auto Power-on—sets the Fishfinder
300C to automatically turn on
whenever power is reapplied after a
loss of power. The Fishfinder 300C
does not automatically turn on if it was
turned off with the POWER key.
Language—allows you to select the
on-screen language.
System Information—displays
software version information and the
Fishfinder 300C ID number.
Factory Settings—deletes all
adjusted settings and turns the
Fishfinder 300C off. When you power
the Fishfinder 300C back on, you
must reconfigure the initial settings
( page 16 ).
•
•
•
•
Units
To change the units of measure:
From the Home screen, select Configure
> Units .
Depth—select Feet (ft) , Meters (m) ,
or Fathoms (fa) .
Water Temp—select Fahrenheit (°F)
or Celsius (°C) . (Available only with
temperature-capable transducers.)
Water Speed—select
Miles/Hour
(mh) , Kilometers/Hour (kh) , or Knots
(kt) . (Available only with speed-
capable transducers or separate
speed wheels.)
Distance—select
Statute (mi) , Metric
(km) , or Nautical (nm) . (Available only
with speed-capable transducers.)
•
•
•
•