GE DPGT750EC/GC - Manual (Page 59)

– 59 –
10. Remove the hinges from the door and install
them on the opposite side with the hinge pin
toward the outside of the door.
11. Insert the door on the opposite side of the
opening by moving the door IN and DOWN
until the top hinge and the bottom hinge are
resting on the top screws.
12. Remove the remaining screws from the side
of the opening from which the door was
removed. With these screws, secure each
hinge at the bottom.
13. Tighten the two top screws of each hinge.
Reinsert the plastic plugs on the side from
which the door was removed.
Opposite Side of
Door
9. Install the handle on the opposite side of the
door.
Rear of Door