Grizzly H6156 - Manual (Page 5)

Model H6156 Cordless Mini Grinder -3 -
Operating this mini grinder can propel
objects into the air, causing immedi-
ate eye damage. To protect your-
self, always wear American National
Standards Institute (ANSI) approved
safety glasses or goggles when oper-
ating this equipment.
No list of safety guidelines can be
complete. Every shop environment
is different. Always consider safety
first, as it applies to your individual
working conditions. Use this and
other machinery with caution and
respect. Failure to do so could result
in serious personal injury, damage
to equipment or poor work results.
1. READ THIS MANUAL. This man-
ual contains proper operating
instructions for this machine.
2. DO NOT jam the grinder against
the workpiece. Firmly grasp the
grinder and ease it against the
workpiece using light pressure.
3. DO NOT wear loose clothing while
operating this machine. Roll up or
button sleeves at the cuff.
4. DO NOT place hands near, or in
contact with, mini grinder during
operation.
5. GRIP THE WORKPIECE FIRMLY.
6. NEVER leave the machine running
unattended.
7. REPLACE grinding disks or sand-
ing sleeves when worn.
8. NEVER work on more than one
item at a time.
Additional Safety Instructions for
this Cordless Mini Grinder
9. ALWAYS disconnect the machine
from the power source before
changing grinding disks, sanding
sleeves, or tool bits
10. ALWAYS test run the machine
before starting any work.
11. DO NOT use the flex shaft with a
tight bend. This may cause binding
and damage the inner spindle.
12. CLAMP THE WORKPIECE. DO
NOT hold the workpiece with one
hand and operate the mini grinder
with the other.
13. DO NOT charge battery when the
battery charger is on a flammable
surface. There is a risk of fire.
14. KEEP BATTERIES AWAY FROM
METAL OBJECTS to prevent ter-
minals from shorting.