Grizzly H6156 - Manual (Page 10)

Model H6156 Cordless Mini Grinder -8 -
Daily Maintenance
These items should be done after each
use.
1. Wipe the motor housing and tool bits
with a dry cloth or blow off dust and
debris with compressed air.
2. Check for damage to bits, cords, or
the housing.
Installing the Flashlight Base
The flashlight base will give you the extra
light that you need in low light situations.
To install the flashlight base:
1. Unplug the tool from power!
2. Remove the collet shield.
3. Screw the flashlight base onto the mini
grinder in place of the collet shield.
4. Turn the flashlight base ON/OFF with
the small switch on the face of the
flashlight base as shown in
Figure 4.
Figure 4. Flashlight base.