Grizzly T10048 User Manual

Page 4

-4-

t10048 Collet/tooling Cart for nt40

7. square up the sides of the cart with the top

and middle shelves, then fully tighten all fas-
teners.

8. With assistance, turn the cart upside down

and install the casters with 16 hex bolts and
lock nuts, as shown in

Figure 11.

Note: To better move the cart, we recom-
mend installing the swivel casters on the
same side as the handle.

9. With assistance, tip the cart upright, then

check for stability and use. if necessary,
loosen fasteners, readjust the panels and
shelves, then re-tighten the fasteners.

Figure 11. Casters installed.

swivel Casters

Fixed Casters