Grizzly G1029Z2P EN - Manual (Page 24)

-22-
g0548zp, g1028z2, g1029z2-z2p (mfg. 12/12+)
9. hook the upper filter bag (fabric) on the sup-
port bracket, as shown in figure 32.
figure 32. Attaching upper filter bag.
10. secure the upper bag to the collector body
with the clamp shown in figure 33.
figure 33. Upper collection bag secured.
Clamp
7. slip a loosened hose clamp over each end
of the flex-hose, and position the hose ends
over the outlets, as shown in
figure 29.
tighten each hose clamp until snug.
figure 29. Attaching flex hose onto collector
body outlet.
hose
Clamps
8. Apply the 5 x 42mm foam strip to the out-
side top of the collector, as shown in figure
30, and trim the excess so that the ends of
the strip come together evenly, as shown in
figure 31.
figure 30. Example of applying the wide foam
strip to the collector.
figure 31. Example of wide foam strip ends
matched evenly.
Ends matched Evenly
Flex
hose
5 x 42mm Foam strip