English – GIGABYTE 5225 User Manual
Page 47
- 43 -
BIOS Setup
English
Onboard LAN Boot ROM
(*)
This function decide whether to invoke the boot ROM of the onboard LAN chip.
Enabled
Enable Onboard LAN chip function.
Disabled
Disable this function. (Default value)
Onboard Serial Port 1
Disabled
Disable onboard Serial port 1.
3F8/IRQ4
Enable onboard Serial port 1 and address is 3F8, using IRQ4. (Default value)
2F8/IRQ3
Enable onboard Serial port 1 and address is 2F8, using IRQ3.
3E8/IRQ4
Enable onboard Serial port 1 and address is 3E8, using IRQ4.
2E8/IRQ3
Enable onboard Serial port 1 and address is 2E8, using IRQ3.
Auto
BIOS will autom atically setup the port 1 address.
Onboard Serial Port 2
Disabled
Disable onboard Serial port 2.
3F8/IRQ4
Enable onboard Serial port 2 and address is 3F8, using IRQ4.
2F8/IRQ3
Enable onboard Serial port 2 and address is 2F8, using IRQ3. (Default value)
3E8/IRQ4
Enable onboard Serial port 2 and address is 3E8, using IRQ4.
2E8/IRQ3
Enable onboard Serial port 2 and address is 2E8, using IRQ3.
Auto
BIOS will autom atically setup the port 2 address.
UART Mode Select
This item allows you to determine which Infra Red(IR) function of Onboard I/O chip.
Normal
Set onboard I/O chip UART to Normal Mode. (Default Value)
IrDA
Set onboard I/O chip UART to IrDA Mode.
ASKIR
Set onboard I/O chip UART to ASKIR Mode.
(*)For GA-7N400E-L only.