beautypg.com

Genie 1022 User Manual

Page 3

background image

PN# 3642036212, 8/09/2007

3

TABLE OF CONTENTS

OPERATOR FEATURES

INTELLICODE

®

Rolling Code Security System.

An electronic rolling code system that enhances the security of
the door operator by continuously changing the access code
each time the remote control is used. The door operator
responds to each new code only once. An access code copied
from a working system and tried again will not control the door
operator.

Lighted Wall Button*.
Operates door operator from inside garage.
(Refer to section 3)

and Car2Ucompatible.

Follow the Homelink

®

or Car2Uinstructions in your car

owner’s manual.

*Operator MUST be installed with the

included Wall Control.

SAFETY FEATURES

Safety Beam Non-Contact Reversing System**.
Puts an invisible beam across the door opening. The door stops
and reverses to the full open position if anything passes
through the beam. Red or green LED indicator lights on the
power head provide a self diagnostic code if an operational
problem exits. (Refer to Section 10.)

Safe-T-Reverse

®

Contact Reversing System.

Automatically stops and reverses a closing door within 2
seconds of contact with an object. (Refer to Section 6.)

Safe-T-Stop

®

Timed Reversed System.

Automatically opens a closing door if it fails to close completely
within 30 seconds.

Force GuardControl.
Features adjustable open and close force settings. For
maximum safety, these must be set to the minimum force
required to fully open and close the door. (Refer to Section 6.)

Relay Monitoring System.
Automatically stops and reverses a closing door if the closing
relay malfunctions.

Watch DogMonitoring System.
Automatically stops and reverses a closing door if the Safety
Beam System** has an operational problem.

Automatic Lighting System.
One bulb lighting supplies up to 60 watts of light for safer
evening exits and entries. Turns ON when door is activated and
automatically turns OFF 3 minutes later.

Manual Emergency Release.
Manually releases door from door operator. Use during a power
failure or other emergency to allow manual opening and closing
of door.

**Safety Beam Safety Reverse System

MUST be installed to close door.

SECTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . PAGE

SAFETY INFORMATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

OPERATOR FEATURES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

SAFETY FEATURES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

PRE-INSTALLATION CHECK LIST . . . . . . . . . . . . . . . . . . . . . . . 4-5

RECOMMENDED TOOLS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

PARTS IDENTIFICATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-7

ARRANGING BOXES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

SAFETY INFORMATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

INSTALLATION

1 OPERATOR ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . 9-10

2 INSTALLATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11-13

3 WALL CONTROL INSTALLATION . . . . . . . . . . . . . . . . . 14-15

4 SAFETY BEAM SYSTEM INSTALLATION . . . . . . . . . . . 16-17

5 CONNECTING TO POWER . . . . . . . . . . . . . . . . . . . . . . . . . 18

ADJUSTMENTS

6 LIMIT SWITCHES & FORCE ADJUSTMENT . . . . . . . . . 19-20

CONTACT REVERSE TEST. . . . . . . . . . . . . . . . . . . . . . . . . 20

7 PROGRAMMING REMOTE CONTROLS. . . . . . . . . . . . . . . 21

8 BATTERY/VISOR CLIP INSTALLATION . . . . . . . . . . . . . . . 22

9 LIGHT BULB AND LENS INSTALLATION . . . . . . . . . . . . . . 22

SAFETY INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

MAINTENANCE & TROUBLESHOOTING

10 ROUTINE MONTHLY MAINTENANCE . . . . . . . . . . . . . . . . 23

WIRING DIAGRAM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
TROUBLESHOOTING GUIDE - OPERATOR . . . . . . . . . . . 25
TROUBLESHOOTING GUIDE - POWER HEAD LED . . . . . 26

TRANSMITTER COMPLIANCY STATEMENT. . . . . . . . . . . . . . . . 27

WARRANTY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

This manual is related to the following products: