GE 25205 - Manual (Page 28)

2
Conference
This feature lets you connect two calls to make a conference call.
To connect with two calls:
1. Make a call and stay in talk mode.
2. Press the
Hold button.
3. Press another line button to answer or make a second call.
4. When the second call connects, press
Confer.
To disconnect one line, press the line button for the party you want to continue talking
with and the other party is automatically disconnected.
To disconnect both lines, hang up the handset or press the
Speaker button if you are
using the speakerphone or press the Headset button if you are using the headset.
To keep both parties on-line but talk to one party:
1. Press the
Hold button to place both lines on hold.
2. To talk with one caller, press the corresponding line button. The other line remains on
hold.
3. To resume the conference call with both lines, press the Confer button.
Do Not Disturb
This feature disables an incoming call ring, within the time duration you selected. You can
program the Do Not Disturb duration.
1. While the handset is on the cradle, press the
DND button. The DND indicator flashes.
2. Use the 5 or 6 button to select the duration. You may choose from 15 minutes, 30
minutes, 45 minutes, 1 hour, or 2 hours and increase the duration by 1 hour intervals
up to 24 hours.
3. Press the Sel/Save button to save your selection.
4. When the Do Not Disturb function is on, the DND indicator flashes. To turn off Do Not
Disturb, press the DND button.
NOTE: When Do Not Disturb is On, you will still receive a ringing line indication, CID
information, and New Call indicators.
Telephone Operation