beautypg.com

User instructions, Running the appliance – Stovax Stockton 7162 User Manual

Page 7

background image

7

UseR INsTRUCTIoNs

5.2 Burning solid fuel:

To burn solid fuel efficiently in a wood version the multi-

fuel kit should be fitted.

Multi-fuel kit part numbers:

Appliance

Part No.

Stockton 5 (all)

7108

Stockton 6 (all)

7117

Stockton 7

7109

Stockton 8

7111

Stockton 8 Slimline

7111SL

Only for use with recommended fuels, see Installation

section

for full fitting details.

• Set air controls, See Diagram 10

PR8006

5.2 De-ash the fire bed before re-fuelling, See Ash Removal

• Open the Primary air control fully to establish a glowing

bed before adding new fuel

• Burn new fuel at high output for a few minutes before

adjusting the Primary air control to the desired setting

• Refuel little and often for clean, efficient burning.

5.3 Experience establishes control settings to suit personal

preferences

5.4 Do not burn large amounts of fuel with the Primary Air

Control

on low settings for long periods of time. This

reduces the glass cleaning effect of the airwash and causes

tars and creosotes to build-up in the appliance and flue

system.

PR8004

• Close the door if desired.

• Use a sparkguard if running with the doors open

5. RUNNING THe APPlIANCe

5.1 Burning Wood:

• Close the Primary air control (multi-fuel versions only)

and use the Airwash to control the burn rate when

appliance is at operating temperature, see Diagram 9

PR8005

• Wood burns best on a bed of ash

• Rake the embers evenly over the fire bed and open the

Airwash control

fully for a few minutes before re-fuelling

4.2 Burn new logs at high output for a few minutes before

adjusting the Airwash control. Refuel little and often for

clean, efficient burning.

4.3 Experience establishes settings to suit personal preferences.

4.4 Do not burn large amounts of fuel with the Airwash control

closed for long periods of time. This reduces the glass

cleaning effect and causes tars and creosotes to build-up in

the appliance and flue system.

4.5 When in use, burning the appliance at high output for a

short period also reduces tars and creosote.