Grandstream Networks 386 User Manual
Page 31
HandyTone-386 User Manual
Grandstream Networks, Inc.
31
350
440
0
0
Dial Tone
350
440
10
10
Recall Dial Tone
350
440
10
10
Message Waiting
350
440
10
10
Confirmation
440
480
200
400
Audible Ringing
480
620
50
50
Busy Tone
480
620
25
25
Reorder Tone
1400
2600
10
10
Receiver offhook
Volume
Amplification: TX
0dB default
RX
0dB default
Update
All Rights Reserved Grandstream Networks, Inc. 2005
The explanations provided apply to both of the FXS port configuration parameters:
SIP Server
IP address or Domain name provided by VoIP service provider
Outbound Proxy
IP address or Domain name of Outbound Proxy, or Media Gateway, or Session
Border Controller. Used by ATA for firewall or NAT penetration in different
network environment. If symmetric NAT is detected, STUN will not work and
ONLY Outbound Proxy will work.
SIP User ID
User account information, provided by VoIP service provider (ITSP), usually
has the form of digit similar to phone number or actually a phone number
Authenticate ID
ID used for authentication, usually same as SIP user ID, but could be different
and decided by ITSP.
Authentication
Password
Password for ATA to register to (SIP) servers of ITSP. Purposely blank out
once saved for security. Maximum length is 25.
Name
User name, not user ID, for information only.
Use DNS SRV:
Default is No. If set to Yes the client will use DNS SRV to lookup for the
server
User ID is Phone
Number
If the HandyTone. If set to yes, a “user=phone” parameter will be attached to
the “From” header in SIP request
SIP Registration
This parameter controls whether the HT386 needs to send REGISTER
messages to the proxy server. The default setting is “Yes”.