Grandstream Networks 386 - Manual (Page 25)

HandyTone-386 User Manual Grandstream Networks, Inc.
25
Firmware Server
Path IP address or domain name of firmware server.
Config Server Path IP address or domain name of configuration server.
Firmware File
Prefix Default is blank. If configured, HandyTone-386 will request the firmware file
with the prefix. This setting is useful for ITSPs. End user should keep it
blank.
Firmware File
Postfix Default is blank. End user should keep it blank.
Config File Prefix Default is blank. End user should keep it blank.
Config File Postfix Default is blank. End user should keep it blank.
Automatic Upgrade Default is “Yes”.
Firmware Key For firmware encryption. It should be 32 digit in Hexadecimal
Representation. End user should keep it blank.
Caller ID Scheme
• Bellcore (North America)
• CID (Canada)
• DTMF (Brazil)
• DTMF (Sweden)
• DTMF (Denmark)
• ETSI-DTMF (Finland, Sweden)
• ETSI-FSK (France, Germany, Norway, Taiwan, UK-CCA)
Onhook Voltage Select the onhook voltage to suit different area or PBX.
Polarity Reversal Default is No. If set to Yes, polarity will be reversed upon call establishment
and termination.
NTP server URI or IP address of the NTP (Network Time Protocol) server, which the
HT386 will use to synchronize the date/time.
Syslog Server The IP address or URL of syslog server, especially useful for ITSP (Internet
Telephone Service Provider)