Grandstream Networks 386 - Manual (Page 26)

HandyTone-386 User Manual Grandstream Networks, Inc.
26
Syslog Level Select the ATA to report the log level. Default is NONE. The level is either
one of DEBUG, INFO, WARNING or ERROR. Syslog messages are sent
based on the following events:
• product model/version on boot up (INFO level)
• NAT related info (INFO level)
• sent or received SIP message (DEBUG level)
• SIP message summary (INFO level)
• inbound and outbound calls (INFO level)
• registration status change (INFO level)
• negotiated codec (INFO level)
• Ethernet link up (INFO level)
• SLIC chip exception (WARNING and ERROR levels)
• memory exception (ERROR level)
The Syslog uses USER facility. In addition to standard Syslog payload, it
contains the following components:
GS_LOG: [device MAC address][error code] error message
Here is an example: May 19 02:40:38 192.168.1.14 GS_LOG:
[00:0b:82:00:a1:be][000] Ethernet link is up
• FXS Port 1 Page:
Grandstream Device Configuration
STATUS
BASIC
SETTINGS
ADVANCED
SETTINGS
FXS
PORT1
FXS
PORT2
SIP Server:
sip.sipserver1.com
(e.g., sip.mycompany.com, or IP address)
Outbound Proxy:
(e.g., proxy.myprovider.com, or IP address, if any)
SIP User ID:
100
(the user part of an SIP address)
Authenticate ID:
100
(can be identical to or different from SIP User ID)
Authenticate
Password:
(purposely not displayed for security protection)
Name:
John Doe
(optional, e.g., John Doe)
Use DNS SRV:
No Yes