Gold's Gym Platinum GGBE25580 - Manual (Page 14)

14
5
7
6
32
ADJUSTING THE SAFETY SPOTTERS
Before using your barbell (not included), set the
Safety Spotters (6) at the lowest point to which you
want your barbell to move.
To do this, hold a Safety Spotter (6) and pull out the
Long Pin (32). Move the Safety Spotter to the desired
height, and reengage the Long Pin into the Safety
Spotter and the Upright (5).
Adjust the other Safety Spotter (not shown) and
the two Weight Rests (7) in the same way.
WARNING:
Always adjust both
Safety Spotters (6) and both Weight Rests (7)
to the same height.