Gateway E-2300 - Manual (Page 59)

53 www.gateway.com
If your system board has dual-channel memory, fill both the Channel A/DIMM 0
memory slot and the Channel B/DIMM 0 memory slot with matching DIMMs.
Matching DIMMs are the same size, density, and technology. When adding memory,
fill both the Channel A/DIMM 1 memory slot and the Channel B/DIMM 1 memory
slot with matching DIMMs.
5
Align the notches on the new DIMM with the notches on the memory module bank
and press the module firmly into the bank. The tabs on the sides of the memory
module should secure the memory module automatically. When the module is secure,
you hear a click.
Channel A/DIMM 0
Channel A/DIMM 1
Channel B/DIMM 0
Channel B/DIMM 1