Goldline LOGIC PL-P-4 - Manual (Page 6)

Gallons and (Liters) of Pool/Spa water
12,000 14,000 16,000 18,000 20,000 22,000 32,000 24,000 34,000 26,000 36,000 28,000 38,000 30,000 40,000
Current salt
level
(45000) (52,500) (60,000) (67,500) (75,000) (82,500) (120,000) (90,000) (127,500) (97,500) (135,000) (105,000) (142,500) (112,500) (150,000) ppm
0
320
(145)
373
(170)
427
(194)
480
(218) (242)
587 854
(267) (388)
640 907
(291) (412)
693 960
(315) (436)
747
(339) (460)
800 1067
(364) (484)
200
300
(136)
350
(159)
400
(182)
450
(205)
500
(227)
550 800
(250) (363)
600 850
(273) (385)
650 900
(295) (408)
700 950
(318) (430)
750 1000
(341) (453)
400
280
(127)
327
(148)
373
(170)
420
(191)
467
(212)
513 747
(233) (339)
560 793
(255) (360)
607 840
(276) (382)
653 887
(297) (403)
700 933
(318) (424)
600
260
(118)
303
(138)
347
(158)
390
(177)
433
(197)
477 693
(217) (317)
520 737
(236) (337)
563 780
(256) (358)
607 823
(276) (378)
650 867
(297) (398)
800
240
(109)
280
(127)
320
(145)
360
(164)
400
(182)
440 640
(200) (291)
480 680
(218) (310)
520 720
(236) (328)
560 760
(255) (346)
600 800
(273) (364)
1000
220
(100)
257
(117)
293
(133)
330
(150)
367
(167)
403 587
(183) (267)
440 623
(200) (283)
477 660
(217) (300)
513 697
(233) (317)
550 733
(250) (333)
1200
200
(91)
233
(106)
267
(121)
300
(136)
333
(152)
367 533
(167) (243)
400 567
(182) (258)
433 600
(197) (274)
467 633
(212) (289)
500 667
(227) (304)
1400
180
(82)
210
(95)
240
(109)
270
(123)
300
(136)
330 480
(150) (218)
360 510
(164) (232)
390 540
(177) (246)
420 570
(191) (259)
450 600
(205) (263)
1600
160
(73)
187
(85)
213
(97)
240
(109)
267
(121)
293 427
(133) (195)
320 453
(145) (207)
347 480
(158) (219)
373 507
(170) (231)
400 533
(182) (243)
1800
140
(64)
163
(74)
187
(85)
210
(95)
233
(106)
257 373
(117) (169)
280 397
(127) (180)
303 420
(138) (190)
327 443
(148) (201)
350 467
(159) (211)
2000
120
100
80
60
20
40
(55)
(45)
(36)
(27)
(9)
(18)
140
117
23
47
(64)
(53)
(11)
(21)
160
133
27
53
(73)
(61)
(12)
(24)
180
150
30
60
(82)
(68)
(14)
(27)
200
167
33
67
(91)
(76)
(15)
(30)
220 320
183 267
37 53
73 107
(100) (145)
(83) (121)
(17) (24)
(33) (48)
240 340
200 283
40 57
80 113
(109) (154)
(91) (129)
(18) (26)
(36) (51)
260 360
217 300
43 60
87 120
(118) (163)
(98) (137)
(20) (27)
(39) (54)
280 380
233 317
47 63
93 127
(127) (172)
(106) (144)
(21) (29)
(42) (57)
300 400
250 333
50 67
100 133
(136) (181)
(114) (152)
(23) (30)
(45) (60)
(32)
80
(36)
90
(41)
100
(45)
110 160
(50) (73)
120 170
(55) (77)
130 180
(59) (81)
140 190
(64) (86)
150 200
(68) (90)
93
(42)
107
(48)
120
(55)
133
(61)
147 213
(67) (98)
160 227
(73) (104)
173 240
(79) (110)
187 253
(85) (117)
200 267
(91) (123)
2200
3000
2800
2400
3200 Ideal Ideal Ideal Ideal Ideal Ideal Ideal Ideal Ideal Ideal Ideal Ideal Ideal Ideal Ideal
2600
3400 OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK
POUNDS and (Kg) OF SALT NEEDED FOR 3200 PPM
3600+ Dilute Dilute Dilute Dilute Dilute Dilute Dilute Dilute Dilute Dilute Dilute Dilute Dilute Dilute Dilute
10,000 8,000
(37,500)
213 267
(97) (121)
200 250
(91) (114)
187 233
(85) (106)
173 217
(79) (98)
160 200
(73) (91)
147 183
(67) (83)
133 167
(61) (76)
120 150
(55) (68)
107 133
(48) (61)
93 117
(42) (53)
80 100
67 83
53 67
40 50
13 17
27 33
(36) (45)
(30) (38)
(24) (30)
(18) (23)
(6) (8)
(12) (15)
Ideal Ideal
Dilute Dilute
(30,000)
3
The pool’s chemistry must be balanced BEFORE activating the Pro Logic’s optional chlorinator function. NOTE: If
the pool does not have new water, add metal remover and non-copper based algaecide to the pool, per manufacturer’s
instructions. This ensures a quick, troublefree transfer to the Pro Logic system.
Salt
(When using optional chlorinator function )
Salt Level
Use the chart on the top of page 4 to determine how much salt in pounds or (Kgs) should be added to reach the
recommended levels. Use the Pool Sizing Formula on page 4 (measurements are in feet/gallons and meters/liters) if
pool size is unknown.
The operating salt level is between 2700-3400 PPM (parts per million) with 3200 PPM being optimal. Before adding
any salt, test the salt level. This is especially important for retrofit installation to older pools where all of the chlorine
added to the pool over time is ending up as salt. If the level is low, determine the number of gallons in the pool and add
salt according to the chart below. A low salt level will reduce the efficiency of the sanitization and result in low chlorine
production. A high salt level can cause the Pro Logic to stop chlorinating. The salt in your pool/spa is constantly
recycled and the loss of salt throughout the swimming season should be minimal. This loss is due primarily to the
addition of water because of splashing, backwashing, or draining (because of rain). Salt is not lost due to evaporation.
28
Valve3 Interlock
If “Enabled”, this feature will override the function (timeclock or in-floor cleaner) selected above and turn
the valve off when: the filter pump is off, first 3 minutes of filter pump operation (allows the pump to prime
and get water flowing), or for the first 3 minutes after solar turns on (allows air in the solar panels to be
purged). Interlock is not available for solar or super chlorinate.
Valve3 External Input Interlock
When Valve3 External Input Interlock is enabled, the Valve3 output will be forced off when the external
input is active. This will have precedence over freeze protection. Valve3 External Input Interlock is not
available for solar and super chlorinate.
Valve3 Freeze Protection
This function protects the pool and plumbed equipment against freeze damage. If Freeze Protection is
enabled and the AIR temperature falls sensor falls below the selected freeze temperature threshold, the Pro
Logic will turn on the valve to allow circulation of the water. IMPORTANT: this only enables operation of
the valve3 output during freeze--see the “Filter Pump Config.” menu to enable freeze protection for the
main circulation system.
6B Spa Config.
+ to view/change
6B A, Button 1
Pool/Spa
Select 6B Spa
A
Push to access the 6 Button Spa Side Remote options
Rotates between System Off, Pool/Spa, Filter, Lights, Heater1,
Aux1 and Aux2
Rotates between all available remotes
Move to previous/next configuration menu
Move to previous/next menu item or next configuration menu
Move to next menu item
if AQL-SS-6B is connected
Select 6B Spa
This menu only appears if more than one AQL-SS-6B is detected at power up. Select which of the available
remote controls (A, B or C) is to be configured.
6B A, Button 1
This menu allows the user to map each button of the AQL-SS-6B to one of the standard Pro Logic
functions. The default selections are: Button 1 - Pool/Spa, Button 2 - Filter, Button 3 - Lights, Button 4 -
Heater1, Button 5 - Aux1 and Button 6 - Aux2.
Remote Menus
Enabled
Toggle between Enabled (default) and Disabled Remote Menus
Move to previous/next configuration menu
This feature will prevent unauthorized access to the Settings, Timers, and Configuration menus from any
of the Pro Logic’s remote display/keypads. When disabled, the remote display/keypads will only show the
default menu and allow on/off control via the pushbuttons. Note that the function of the Pro Logic’s built-
in display/keypad is unchanged by this selection. Once disabled, the only way to enable “Remote
Menus” is to use the local display/keypad.
All Timeclocks
7-day Move to previous/next configuration menu
Toggle between 7-day (default) and Weekend/Weekday time options
This selection affects ALL of the timeclock logic in the Pro Logic. If “7-day” is selected, each timeclock will
have one set of turn-on/turn-off settings that operate every day of the week. If “Weekend/Weekdays”
option is selected then the user can enter one set of turn-on/turn-off times for the weekend (fixed as
Saturday/Sunday) and another set of turn-on/turn-off times for weekdays (Monday through Friday).