GIGABYTE GN-WP01GT - Manual (Page 26)

26
the Passphrase used by the access point with which you
are planning to communicate.
Click OK to save your changes and to return to the Profile
Management window.
Figure 21. Enter WPA Passphrase
Using LEAP – Before you can enable LEAP authentication, your
network access point must be configured for LEAP authentication.
Perform one of the following from the Security Tab:
z If you want to enable LEAP without WPA/WPA2, choose
802.1x under Set Security Options and LEAP in the
802.1x EAP Type drop-down box.
z If you want to enable LEAP with WPA/WPA2, choose
WPA/WPA2 under Set Security Options and LEAP in the
WPA/WPA2 EAP Type drop-down box.