GIGABYTE GN-WP01GT - Manual (Page 24)

24
Profile Management > Security Screen
The wireless security sub tab offers you the method of security (if any) you may
select. Select WPA/WPA2, WPA/WPA2-Passphrase, 802.1x, Pre Shared WEP,
or None. WPA/WPA2 is a security standard stronger than WEP encryption,
and 802.1x is the RADIUS authentication service. The default setting is None.
Figure 19. Profile Management > Security Tab
Set Security Method – WPA/WPA2 – Wi-Fi Protected Access - Choosing
WPA opens the WPA/WPA2 EAP drop-down menu. The options include
EAP-TLS, EAP-TTLS, PEAP(EAP-GTC), PEAP(EAP-MSCHAR V2), LEAP
and EAP-FAST. Click on the Configure button and fill in the Define
Certificate dialog.
WPA/WPA2-Passphrase - Enables WPA/WPA2-Pre Shared Key (PSK).
Click on the Configure button and fill in the WPA/WPA2 Passphrase.
802.1x – RADIUS Authentication. Enables 802.1x security, and is only
available if a RADIUS Server is connected to the router) Choosing 802.1x
opens the 802.1x EAP type drop-down menu. The options include
EAP-TLS, EAP-TTLS, PEAP(EAP-GTC), PEAP(EAP-MSCHAR V2), LEAP
and EAP-FAST
Pre-Shared Key - Enables the use of pre-shared keys that are defined on
both the access point and the station. To define pre-shared encryption keys,
choose the Pre-Shared Key radio button and click the Configure button to
fill in the Define Pre-Shared Keys window.
Allow Associate to Mixed Cells – Check the Allow Association to Mixed