GarrettCom Magnum 10Mb/s User Manual

Page 36

Magnum 10Mb Media Converters

Installation and User Guide (07/98)

GARRETT

3.3

Connecting Ethernet Media

Connecting Ethernet media to the Magnum Media Converter is very simple and

straightforward. Using a properly terminated media segment, simply attach the cable end

to the appropriate connector.

See Sections 4.2 and 4.3 for a description of the LEDs of the media converter

models.

3.3.1

Connecting Twisted Pair (RJ-45, standard and Link Pass-through models)

The following procedure describes how to connect a 10BASE-T twisted pair

segment to the RJ-45 port on the Magnum Media Converters. The procedure is the same

for both unshielded and shielded twisted pair segments.