GarrettCom CSG14 - Manual (Page 65)

CSG14 Series Gigabit Converter Switch Installation and User Guide (09/09)
56
www GarrettCom com . .
Fiber (Multi-mode) 100BASE-FX SC
Fiber (Single-mode) 100BASE-FX SC, LC
Fiber (Multi-mode, Single-mode) 1000BASE-SX SC, LC
Fiber (Single-mode) 1000BASE-LX/ZX LC
NOTE : It is recommended that high quality CAT 5E or CAT 6 cables (which work for
10Mbps, 100Mbps and 1000Mbps) be used whenever possible in order to provide
flexibility in a mixed-speed network, since CSG14 Series switch ports are auto-
sensing for either 10,100 or 1000Mbps. Note that the auto-cross function does
not operate, if the port is fixed or not supporting auto-negotiation.
3.8.1 Connecting Twisted Pair (RJ-45, CAT 3, CAT 5 or CAT 6, Unshielded or
Shielded)
The following procedure describes how to connect a 10BASE-T, 100BASE-TX
or 1000BASE-T twisted pair segment to the RJ-45 port. The procedure is the same for both
unshielded and shielded twisted pair cables.