GarrettCom CSG14 User Manual
Page 22
CSG14 Series Gigabit Converter Switch
Installation and User Guide (09/09)
13
www GarrettCom com
.
.
“LX25” = 1000Base-LX-SLC: 1310nm single-mode fiber optic with LC type connector, 25 km
“ZX40” = 1000Base-ZX-SLC: 1550nm single-mode fiber optic with LC type connector, 40 km
“ZX70”= 1000Base-ZX-SLC: 1550nm single-mode fiber optic with LC type connector, 70 km
“SFP” = open SFP transceiver slot in the fiber position. (order SFP as a separate item)
“SFP-SX”= 1000Base-SX-LC: 850nm multi-mode SFP, 550 m
“SFP-ESX”= 1000Base-SX Extended: 1310nm multi-mode fiber optic with LC type connector, 2 km
“SFP-LX10”= 1000Base-LX-SLC: 1310nm single-mode SFP, 10 km
“SFP-LX25”= 1000Base-LX-SLC: 1310nm single-mode SFP, 25 km
“SFP-ZX40”= 1000Base-ZX-SLC: 1550nm single-mode SFP, 40 km
“SFP-ZX70”= 1000Base-ZX-SLC: 1550nm single-mode SFP, 70 km
CSG14UH (Hardened Model) for 1000Mb fiber
CSG14UH-ff-Hd, Hi =
Hardened (H), one 10/100/1000Mb RJ-45+ two 1000Mb Fiber ports for
factory floor (-25 to 60C) using a direct DC ( 8-15VDC) and/or external
AC hardened power supply (included).
CSG14UH-ff-12VDC =
Same as CSG14UH model,
except AC hardened power supply is not included
CSG14UH-ff-24VDC =
Same as CSG14UH-12VDC model,