Stovax STUDIO 8700CFCHEC - Manual (Page 18)

18
INSTALLATION INSTRUCTIONS
INSTALLATION
23
AR1965
4.5 • Loosen the two screws retaining the plate beneath the
burner
The front of the plate can now be lifted off the screws:
• Pull it forward and remove, Diagram 24
24
AR1966
4.6 • Remove the three screws retaining the rear back panel
• Lift and pull forward off the slotted brackets
25
AR1966
4.7 With the appliance on its back:
• Remove the three wing nuts and screws retaining the
loose box, Diagram 26.
26
AR1967
• Move the box forward to release the rear off the studs
• Tilt the front edge of the box upwards and remove from
the appliance
4.8 METHOD 1 - FRAME
• Fit the four frame fixing brackets through the rear of the
flanges.
• Attach the foam seal around the rear of the flange,
Diagram 27
27
AR1913
• Fit the main firebox into the aperture and secure with
the screws and rawl plugs provided through the top and
bottom flanges, Diagram 28
28
AR1913