Grizzly G0702 - Manual (Page 20)

-18-
Model g0702 (Mfg. since 1/12)
SECtION 6: MAINtENANCE
Always disconnect power
to the machine before
performing maintenance.
failure to do this may
result in serious person-
al injury.
For optimum performance from your machine,
follow this maintenance schedule and refer to any
specific instructions given in this section.
Daily Check:
•
loose mounting bolts.
• Worn loose, or damaged sanding disc.
• Worn or damaged power cord.
• any other condition that could hamper the
safe operation of this machine.
Weekly Maintenance:
•
Wipe off the sawdust build-up from the table
surface.
• vacuum out dust from the motor fan area and
from around the base of the machine.
Schedule
Cleaning the Model g0702 is easy. vacuum
excess wood chips and sawdust, and wipe off the
remaining dust with a dry cloth. if any resin has
built up, use a resin dissolving cleaner to remove
it. treat all unpainted cast iron and steel with a
non-staining lubricant after cleaning.
Cleaning
protect the unpainted cast iron surfaces on the
table by wiping the table clean after every use—
this ensures moisture from wood dust does not
remain on bare metal surfaces.
Keep tables rust-free with regular applications of
products like g96
® gun treatment, Slipit ® , or
Boeshield ® t-9.
unpainted Cast Iron
this machine uses permanently lubricated ball
bearings. no bearing maintenance is required.
Lubrication
When the dust collector is not in use, unplug the
power cord from the power source. place the cord
away from potential damage sources, such as high
traffic areas, sharp objects, heat sources, harsh
chemicals, water, damp areas, etc. When the dust
collector is not in use, Keep unpainted surfaces
rust free with products such as Boeshield® t-9.
Machine Storage